[LUAU] NIC workstation BIOS fix (was: Network printer)

[Michael Bishop]

R. Scott Belford wrote:
> Some cables were loose and what not, so after some time 15 out of 20 of
> the clients are now booting.  5 of the NIC workstations are asking for a
> CDROM.  Michael B. has apparently found a fix to this and either he or
> Bully will be implementing it.
I thought I had posted the fix. Here it is:

Unplug the power and take the cover off the box.
Locate the jumper near the bios.
Move it to the other position.
Leave the box open and plug it in, start the computer.
Change the BIOS setting. Save BIOS.
Unplug the box.
Move the jumper to the original position.
Plug box back in. Start it up and check to make sure it works.
Note that the color of the BIOS screen changes when you change jumper 
positions. That is normal.

Make sure to bring needle nose pliers as the box is very tight to work in.

Michael