[LUAU] I still don't get it :(
Yagyu Retsin
yaguretsin at juno.com
Sat Dec 26 05:56:39 PST 1998
Miles,
you may want to change the color depth from 8 to 16 bit.
On Sat, 26 Dec 1998 03:34:29 +0000 (UTC) Myles Uyema <myles at uyema.net>
writes:
>> (--) Mach64: Mode "1600x1200" needs hsync freq of 105.77 kHz.
>Deleted.
>> (--) Mach64: Mode "1280x1024" needs hsync freq of 107.16 kHz.
>Deleted.
>> (--) Mach64: Mode "1800X1440" needs hsync freq of 96.15 kHz.
>Deleted.
>> (--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz.
>Deleted.
>>
>> *** None of the configured devices were detected.***
>>
>>
>> Fatal server error:
>> no screens found
>>
>
>XF86Config file...
>>
>> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
>> # USER MANUAL FOR THE CORRECT NUMBERS.
>>
>> HorizSync 30-94
>>
>> # VertRefresh is in Hz unless units are specified.
>> # VertRefresh may be a comma separated list of discrete values, or a
>> # comma separated list of ranges of values.
>> # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
>> # USER MANUAL FOR THE CORRECT NUMBERS.
>>
>> VertRefresh 48-160
>>
>
>Direct your attention to the HorizSync line in your XF86Config file.
>Also make note of the (---) messages in the Xserver error output.
>Because of "HorizSync 30-94" the Xserver decided it can't use any
>modelines in your configuration file. So it quits because, quite
>naturally, no "screens" can be found. "Screens" in this case, means a
>"Modeline" it can use within the scope of the XF86Config guidelines.
>
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
More information about the LUAU
mailing list