[LUAU] I tried it another way, but ...

[HawaiiBuc]

Aloha everyone,
  I went to RedHat's FTP site and fot the following RPMs:

    XFree86-100dpi-fonts-3.3.3-1
    XFree86-3.3.3-1
    XFree86-devel-3.3.3-1
    XFree86-libs-3.3.3-1
    XFree86-mach64-3.3.3-1
    XFree86-SVGA-3.3.3-1
    XFree86-VGA16-3.3.3-1
    XFree86-XF86Setup-3.3.3-1
    XFree86-xfs-3.3.3-1
    XFree86-Xvfb-3.3.3-1

  I had to use the '--force' option on a couple of them, but they all
installed.  I ran the XF86Setup program, and it worked a lot faster this
time around.  I still got the connection error, however.  The following is
the output:

+++



XFree86 Version 3.3.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: November 18 1998
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
  Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0)
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: ps/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) Mach64: Graphics device ID: "My Video Card"
(**) Mach64: Monitor ID: "My Monitor"
(--) Mach64: Invalid vertical timing for mode "400x300". Deleted.

Fatal server error:
No "Display" subsection for default depth 8


When reporting a problem related to a server crash, please send
the full server output, not just the last messages

_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit:  Connection refused (errno 111):  unable to connect to X server
xinit:  No such process (errno 3):  Server error.

+++

  I used ATI Rage Pro for the card this time around both ATI Rage Pro and
Xpert 98 use the XF86_Ma64 server), but still got the same result.  I also
noticed the lack of a display subsection for default depth 8.  How can I go
about correcting that?  Also, I forgot to put in the
/usr/X11R6/lib/X11/XF86Config file; I can e-mail it later if anyone would
like to take a look.

                                                                Thanks in
advance,

                                                                       Bud
Jones