[luau] more firewall script questions

[Warren Togami]

----- Original Message ----- 
From: "Thomas David Burns" <tburns at hawaii.edu>
To: <luau at videl.ics.hawaii.edu>
Sent: Monday, November 18, 2002 2:11 PM
Subject: Re: [luau] more firewall script questions
> 
> Well, obviously, but I just said all the clients are set to look there. 
> That's why I switched, all the clients were already using 192.168.1.1, 
> I didn't want to have to reconfigure them. 
> 
> The question in my mind is more, is there some special meaning to 
> 192.168.0 different from 192.168.1. Both are local test addresses, so 

No, they are only different arbitrary numbers.

> far as I know, and there shouldn't be a problem. But I certainly have 
> some kind of problem. I tested all the hardware, it looks good to me, 
> but when I run the script, it generates no errors, but no traffic gets 
> past the firewall that I can see. It is as if ip forwarding was not 
> happening. eth0 and eth1 are working, but do not talk to each other. 
> 

Can internal LAN clients ping 192.168.1.1 on eth1?
Can the Linux machine ping the clients in 192.168.1.0/24?
Is the gateway address on the client computers 192.168.1.1?
Is the DNS set properly on the internal client computers?

Warren Togami
warren at togami.com