cdrom error

[Rodney K]

yup it's an IDE burner....it worked in Mandrake 8.0, since i've upgraded to 
8.1 i've never tried burning with it till today. All I did with it up until 
today was read cd's. Running cdrecord detects the drive as:

Cdrecord 1.10 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0     0) 'Memorex ' 'CRW-2642        ' '1.0q' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *

On Tuesday 23 October 2001 05:45 pm, you wrote:
> Is that an IDE burner, using the SCSI emulator?
>
> In the past, have you successfully burned any other CD images while using
> the current kernel?
>
> ----- Original Message -----
> From: "Rodney K" <pepe65 at hawaii.rr.com>
> To: "Linux & Unix Advocates & Users" <luau at list.luau.hi.net>
> Sent: Tuesday, October 23, 2001 5:41 AM
> Subject: [luau] cdrom error
>
> > Does this mean my CDRW drive is dead?
> >
> > [root at hawaii tmp]# cdrecord dev=0,0,0 speed=4 enigma-i386-disc1.iso
> > Cdrecord 1.10 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 Jörg
>
> Schilling
>
> > scsidev: '0,0,0'
> > scsibus: 0 target: 0 lun: 0
> > Linux sg driver version: 3.1.20
> > Using libscg version 'schily-0.5'
> > Device type    : Removable CD-ROM
> > Version        : 0
> > Response Format: 1
> > Vendor_info    : 'Memorex '
> > Identifikation : 'CRW-2642        '
> > Revision       : '1.0q'
> > Device seems to be: Generic mmc CD-RW.
> > Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> > Driver flags   : SWABAUDIO
> > Starting to write CD/DVD at speed 4 in write mode for single session.
> > Last chance to quit, starting real write in 0 seconds. Operation starts.
> > cdrecord: Input/output error. send opc: scsi sendcmd: no error
> > CDB:  54 01 00 00 00 00 00 00 00 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 70 00 04 D1 D9 00 00 0A 00 00 00 00 09 01 00 00
> > Sense Key: 0x4 Hardware Error, Segment 0
> > Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
> > Sense flags: Blk -774307840 (not valid)
> > cmd finished after 4.136s timeout 60s
> > cdrecord: Resource temporarily unavailable. OPC failed.
> > [root at hawaii tmp]#
>
> ---
> You are currently subscribed to luau as: pepe65 at hawaii.rr.com
> To unsubscribe send a blank email to $subst('Email.Unsub')