I'm getting this error message:

[Mike Ballon]

I'm not sure about the suse firewall but for most:

ntp uses port 123 both udp and tcp although if you allow everything from the
inside out it and allow "established" to should work.

what client are you using for time sync?


>After I enable my SuSE 7.1 firewall configuration, I get the following
>message"
>
>>>>>Apr  9 06:17:45 a24b161n139client142 ntpdate[483]: no server suitable for
synchronization found<<<<<
>
>But if the firewall is not actuated I get this:
>
>>>>>Apr  8 12:55:27 a24b161n139client142 ntpdate[308]: step time server 128.2.191.71
offset 0.255133 sec<<<<<
>
>I have a time fetish and like the clock on my computer to be perfectly
>synchronized to and Internet time standard.  Can anyone tell me how to
>get this signal to pass through the SuSE 7.1 firewall?  Note: it uses
>the 2.4 kernel.
>
>With the firewall activated I'm reported as "totally stealth" at the
>"Shields Up" web site.  That's something I like:  Here is the log
>entries from the "Shields Up" probe:
>
>Apr  9 06:24:28 a24b161n139client142 kernel: Packet log: output DENY
>eth0 PROTO=1 24.161.139.142:3 24.25.227.34:3 L=203 S=0xC0 I=0 F=0x4000
>T=255 (#3)
>Apr  9 06:24:35 a24b161n139client142 kernel: Packet log: output DENY
>eth0 PROTO=1 24.161.139.142:3 24.25.227.34:3 L=442 S=0xC0 I=0 F=0x4000
>T=255 (#3)
>Apr  9 06:30:50 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4022 24.161.139.142:21 L=48 S=0x00 I=52344
>F=0x4000 T=113 SYN (#12)
>Apr  9 06:30:53 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4022 24.161.139.142:21 L=48 S=0x00 I=53116
>F=0x4000 T=113 SYN (#12)
>Apr  9 06:31:00 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4022 24.161.139.142:21 L=48 S=0x00 I=54885
>F=0x4000 T=113 SYN (#12)
>Apr  9 06:31:13 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4108 24.161.139.142:23 L=48 S=0x00 I=58353
>F=0x4000 T=113 SYN (#16)
>Apr  9 06:31:16 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4108 24.161.139.142:23 L=48 S=0x00 I=59358
>F=0x4000 T=113 SYN (#16)
>Apr  9 06:31:23 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4108 24.161.139.142:23 L=48 S=0x00 I=60730
>F=0x4000 T=113 SYN (#16)
>Apr  9 06:31:59 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4267 24.161.139.142:79 L=48 S=0x00 I=3289 F=0x4000
>T=113 SYN (#20)
>Apr  9 06:32:02 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4267 24.161.139.142:79 L=48 S=0x00 I=4139 F=0x4000
>T=113 SYN (#20)
>Apr  9 06:32:09 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4267 24.161.139.142:79 L=48 S=0x00 I=5581 F=0x4000
>T=113 SYN (#20)
>Apr  9 06:32:45 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4382 24.161.139.142:110 L=48 S=0x00 I=13162
>F=0x4000 T=113 SYN (#22)
>Apr  9 06:32:48 a24b161n139client142 kernel: Packet log: input DENY eth0
>PROTO=6 207.71.92.221:4382 24.161.139.142:110 L=48 S=0x00 I=13806
>F=0x4000 T=113 SYN (#22)
>
>---
>You are currently subscribed to luau as: calzonie at hawaii.rr.com
>To unsubscribe send a blank email to $subst('Email.Unsub')
>