Diagram of my system

[kevin]

> Post the output (on the router) of:
>
> dmesg
>
> ifconfig
>
> route -n

> Gary

Hi, Gary

Okay here is the Info you asked for.  I had to retype all this info., Is
there a way to copy this to a floppy or something.  I also pulled one of my
3c509 and installed a intel eepro.  Same thing happens.  No outside pinging.
BTW, this LRP disk is 2.9.4 with dhclient.lrp install.

route -n

Kernel IP Routing Table
Destination        Gateway            Genmask            Flag        Metric
Ref        Use    Iface
127.0.0.0            0.0.0.0                255.0.0.0            U
0                0           0        lo
0.0.0.0                0.0.0.0                0.0.0.0                 U
0                0         19     eth0
----------------------------------------------------------------------------
-------------------------------------------------
dmesg

To many things to type, but it does detect both nics and they are assign io
and irq.  But it does have 1 error message.

"Checking 386/387 coupling...ok, fpu using exception 16 error reporting
----------------------------------------------------------------------------
-------------------------------------------------
ifconfig

lo       Link encap:Local Loopback
          inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
          UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
          RX packets:7 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7 erros:0 dropped:0 overruns:0 carriers:0
          Collisions:0

eth0  Link encap:Local Ethernet HWaddr  00:A0:C9:A2:F5:06
          inet addr:0.0.0.0  Bcast:255.255.255.255  Mask:0.0.0.0
          UP BROADCAST LOOPBACK RUNNING MTU:1500 Metric:1
          RX packets:11 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 erros:0 dropped:0 overruns:0 carriers:0
          Collisions:0
          Interrupt:5 Base address:0x210

eth1  Link encap:Local Ethernet HWaddr  00:20:AF:1A:2E:D1
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST LOOPBACK RUNNING MTU:1500 Metric:1
          RX packets:50 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 erros:0 dropped:0 overruns:0 carriers:2
          Collisions:0
          Interrupt:10 Base address:0x300
----------------------------------------------------------------------------
-------------------------------------------------
When it boots up, everthing seems okay until it tries to find the dhcp
server I think.  This is the message I get:

DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19
No DHCPOFFER received
No working leases in persistent database - sleeping

Thanks,

Kevin