[luau] Re: dual pentium pro

[Yu Ming]

Actually, I have a pair of PIII 1.13Gs, but with 133 Mhz bus.  Would
anyone like to trade in their 100Mhz bus PIII 1.1Gs for my processors?
Ming Yu

> Thank you,Dusty. But maybe you have used Powerleap's Neo S370 in
> conjunction with PL-PRO/II, since PIII 1.1Ghz's pin definition (as as
> well as the voltage?) is different from Celeron 533's.
> Ming Yu
>
>> Aloha,
>>
>> Yes,  just put faster PIII processors in the PL-PRO/II adapters.  The
>> PPro systems run at 66mhz.  What I did was convince Powerleap to sell
>> me PL- PRO/II adapters with no processors and then I bought 2x PIII
>> 1.1Ghz processors with 100Mhz bus.  The bus is the important part.
>> Basically you are under clocking the processor in the PPro system.
>> One of the PIIIs I got was 133Mhz bus (the retailer thought he was
>> doing me a favor) and that processor ran much slower (1.1Ghz @ 100Mhz
>> underclocked to 66Mhz = 726Mhz, 1.1Ghz at 133Mhz underclocked to 66Mhz =
>> 539Mhz).  So I traded in that processor for the 100Mhz and everything
>> worked fine.  My Tyan 1662 board booted right up and worked great with
>> Linux and Win2k .
>>
>>
>> Mahalo,
>> Dusty
>>
>>
>>> I had a dual pentium pro machine running Linux, and recently upgraded
>>> the machine to dual celeron 533MHz by using the socket converter
>>> PL-PRO/II manufactured by Powerleap. I read from your archives
>>> that someone can upgrade such machine to dual PIII 730MHz.
>>> Does anyone know how this could be done or give any hint?
>>> Ming Yu
>>>
>>>
>>> _______________________________________________
>>> LUAU mailing list
>
>
>
> _______________________________________________
> LUAU mailing list
> LUAU at videl.ics.hawaii.edu
> http://videl.ics.hawaii.edu/mailman/listinfo/luau