DHCP & Cable modem

[Chris M. Rafael]

Unfortunately my car is in the shop and I won't be
able to attend this meeting, however if this offer is
still good at the next meeting, and I still have the
problem, I would most graciously accept this invitation.

Mahalo!

-chris





  -----Original Message-----
  From: Warren Togami [mailto:warren at togami.com]
  Sent: Tuesday, June 19, 2001 10:04 AM
  To: Linux & Unix Advocates & Users
  Subject: [luau] Re: DHCP & Cable modem


  Would you be able to bring that machine to our seminar on Thursday night?
Here is the information for that seminar
http://www.mplug.org/events/seminar4.html  We have a DHCP network on campus,
so we may be able to quickly diagnose and fix your problem.

    ----- Original Message -----
    From: Chris M. Rafael
    To: Linux & Unix Advocates & Users
    Sent: Tuesday, June 19, 2001 1:36 AM
    Subject: [luau] Re: DHCP & Cable modem


    Thanks for all the information, everyone, but still no luck.

    Here's some of my configs, a snip of the logs, and a few ifconfigs
    while trying to run dhcpcd from a command line.

    When this is happening, the modem lights hardly blink.

    I've tried this on both eth0, and on eth1 where I have a
    ne2000 config'd and working.  Same results.

    If I pull the rj45 out of the modem and plug it into
    my hub and set it up to run on a local network, everything
    works fine, on both interfaces.  This leads me to believe
    the cards are set up just fine.

    On earlier versions I did have to install dhcp, w/6.2 i was
    able to get things working right out of the box.

    Am I missing something?
  ---
  You are currently subscribed to luau as: thecomputerguy at hawaii.rr.com
  To unsubscribe send a blank email to $subst('Email.Unsub')
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freesoftwarehawaii.org/pipermail/luau-freesoftwarehawaii.org/attachments/20010619/fc43a16a/attachment-0001.htm>