[LUAU] Help with cdrecord!
Scott Cooley
scott at hi.net
Sun Apr 25 21:40:18 PDT 1999
Does anyone have experience with cdrecord? Especially with a Yamaha
CDR-400t? Well i'm having a hell of a time getting it to work properly on
my system. This is a message I posted to one of the groups looking for
help. If you can help please, please, do.
thanks,
scott
-----
I got a new Yamaha CDR-400t which works fine under windows. With
cdrecord, it's very sporadic. I've yet to produce a usable CD. If I do a
dummy write (audio CD), it works fine the first time. If I try another
dummy write, it always barfs, and always at different points. Sometimes
in the first track, sometimes halfway through. Sometimes it resets the
bus after this happens, and I can try again, but sometimes it leaves the
bus hanging and I must reboot.
Here is what I get (in full to give you as much info as possible):
----------------
Cdrecord release 1.6.1a7 Copyright (C) 1995-1998 Jrg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,2,0'
scsibus: 0 target: 2 lun: 0
atapi: -1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'YAMAHA '
Identifikation : 'CDR400t '
Revision : '1.0q'
Device seems to be: Yamaha CDR-400.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Track 01: audio 42 MB (04:11.18) no preemp
Track 02: audio 42 MB (04:12.02) no preemp
Track 03: audio 47 MB (04:44.02) no preemp
Track 04: audio 50 MB (04:59.16) no preemp
Track 05: audio 46 MB (04:36.62) no preemp
Track 06: audio 39 MB (03:57.02) no preemp
Track 07: audio 43 MB (04:19.69) no preemp
Track 08: audio 41 MB (04:05.04) no preemp
Track 09: audio 37 MB (03:43.42) no preemp
Track 10: audio 41 MB (04:08.52) no preemp
Track 11: audio 38 MB (03:51.52) no preemp
Track 12: audio 40 MB (03:59.69) no preemp
Track 13: audio 37 MB (03:42.94) no preemp
Track 14: audio 39 MB (03:55.42) no preemp
Track 15: audio 37 MB (03:43.16) no preemp
Track 16: audio 40 MB (04:02.76) no preemp
Total size: 673 MB (66:42.24) = 300168 sectors
Lout start: 673 MB (66:44/18) = 300168 sectors
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
ATIP start of lead in: -11325 (97:31/00)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Cyanine, AZO or similar
Manufacturer: Ritek Co.
Blocks total: 336225 Blocks current: 336225 Blocks remaining: 36057
RBlocks total: 345460 RBlocks current: 345460 RBlocks remaining: 45292
Starting to write CD/DVD at speed 4 in dummy mode for single session.
Starting new track at sector: 0
Track 01: 0 of 42 MB written.
CDB: 2A 00 00 00 48 DF 00 00 0D 00
cmd finished after 80.995s timeout 40s
cdrecord: Device or resource busy. write_g1: scsi sendcmd: retryable error
status: 0x0 (GOOD STATUS)
write track data: error after 43876560 bytes
CDB: 03 00 00 00 12 00
cmd finished after 81.000s timeout 40s
cdrecord: Device or resource busy. request_sense: scsi sendcmd: retryable
error
status: 0x0 (GOOD STATUS)
Track 01: audio 42 MB (04:11.18) no preemp
Track 02: audio 42 MB (04:12.02) no preemp
Track 03: audio 47 MB (04:44.02) no preemp
Track 04: audio 50 MB (04:59.16) no preemp
Track 05: audio 46 MB (04:36.62) no preemp
Track 06: audio 39 MB (03:57.02) no preemp
Track 07: audio 43 MB (04:19.69) no preemp
Track 08: audio 41 MB (04:05.04) no preemp
Track 09: audio 37 MB (03:43.42) no preemp
Track 10: audio 41 MB (04:08.52) no preemp
Track 11: audio 38 MB (03:51.52) no preemp
cdrecord: faio_wait_on_buffer for writer timed out.
Track 12: audio 40 MB (03:59.69) no preemp
Track 13: audio 37 MB (03:42.94) no preemp
Track 14: audio 39 MB (03:55.42) no preemp
Track 15: audio 37 MB (03:43.16) no preemp
Track 16: audio 40 MB (04:02.76) no preemp
Total size: 673 MB (66:42.24) = 300168 sectors
Lout start: 673 MB (66:44/18) = 300168 sectors
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
ATIP start of lead in: -11325 (97:31/00)
ATIP start of lead out: 336225 (74:45/00)
Disk type: Cyanine, AZO or similar
Manufacturer: Ritek Co.
Blocks total: 336225 Blocks current: 336225 Blocks remaining: 36057
RBlocks total: 345460 RBlocks current: 345460 RBlocks remaining: 45292
CDB: 35 00 00 00 00 00 00 00 00 00
cmd finished after 240.999s timeout 120s
Trouble flushing the cache
Writing time: 471.571s
cdrecord: Device or resource busy. flush cache: scsi sendcmd: retryable
error
status: 0x0 (GOOD STATUS)
----------------------------------
I am running Linux 2.2.6, but I have also tried with 2.0.36. I have tried
recompiling cdrecord for each version of the kernel I used. And I have
tried both cdrecord 1.6.1a7 and 1.8a21.
For a short period yesterday I was able to write CDs fine. I made two,
then realized my audio was in the wrong format (it was at 44188Hz so each
track contained only noise). I re-ripped my audio, and ever since then I
have this problem.
I have an Adaptec 2920 (uses Future Domain driver). Right now the
cd-recorder is the only device on the bus.
Here is the command I've been using:
cdrecord -v -dummy -eject -pad speed=4 dev=0,2,0 -audio -swab
/home/scott/rip/track1.wav /home/scott/rip/track3.wav
/home/scott/rip/track4.wav /home/scott/rip/track5.wav
/home/scott/rip/track6.wav /home/scott/rip/track7.wav
/home/scott/rip/track8.wav /home/scott/rip/track9.wav
/home/scott/rip/track10.wav /home/scott/rip/track11.wav
/home/scott/rip/track12.wav /home/scott/rip/track13.wav
/home/scott/rip/track14.wav /home/scott/rip/track15.wav
/home/scott/rip/track16.wav /home/scott/rip/track17.wav
I know this is a lot of information, but I hope it will you help you. I
am completely at a loss. Any help is greatly appreciated.
thanks,
scott
__
Scott M. Cooley UIN : 512574
Cybertech Systems PGP Key :
Honolulu Hawaii finger scott at hi.net
scott at hi.net http://www.cts-hawaii.com
--
__ __ __________ __
/ / / / / / __ / / / / Home Page: http://luau.hi.net
/ /__/ /_/ / /_/ / /_/ /
/____/\____/_/ /_/\____/ LUAU - Linux Users AnonymoUs - Hawaii
To unsubscribe: echo unsubscribe luau | mail majordomo at luau.hi.net
LUAU meetings are the 3rd Tuesday of each month 6pm
More information about the LUAU
mailing list